Lubricants Catalog
Low Staining Bearing and gear oil for use in aluminium rolling mills
Multipurpose range for all machine tool parts depending on the viscosity of the lubricant: hydraulic, slideways, gears, spindle movements, feed and gear boxes.
Multipurpose range for all machine tool parts depending on the viscosity of the lubricant: hydraulic, slideways, gears, spindle movements, feed and gear boxes.
Multipurpose range for all machine tool parts depending on the viscosity of the lubricant: hydraulic, slideways, gears, spindle movements, feed and gear boxes.
Multipurpose range for all machine tool parts depending on the viscosity of the lubricant: hydraulic, slideways, gears, spindle movements, feed and gear boxes.
Hydraulic systems operating in high temperature and pressure conditions. Bearings and miscellaneous devices
Martol AL 20 HC is a high performance forming oil specially optimised for aluminum. It is suitable for all kind of forming operations (deep drawing, wire drawing, tube drawing,...)
New generation ashless dispersive monograde mineral lubricants, specially developed to improve anti-wear and corrosion protection of your highly valued piston aviation engine. These oils already contain an anti-wear additive similar to TEXTRON Lycoming LW 16702.
TRANSTEC 4 SAE 140 is a monograde oil for gears requiring an API GL-4 level of performance.
TRANSTEC 4 SAE 90 is a monograde oil for gears requiring an API GL-4 level of performance. TRANSTEC 4 SAE 90 can be used to lubricate gearboxes, axles, transfer boxes and other gear reductors on equipment for the automobile and agricultural sectors.
TRANSTEC 4 SAE 80W is a monograde oil for gears requiring an API GL-4 level of performance. TRANSTEC 4 SAE 80W can be used for gearboxes requiring monograde SAE 80W.
GRAFOLOG H 00 R is a grease that has been specifically formulated to provoke physical wear through a chemical reaction which is necessary for the lapping in of metallic parts in contact. GRAFOLOG H 00 R creates a controlled wear in the zones that are under higher load. These high load areas which create more pressure and temperature, sets off the lapping reaction until the surfaces are equalized.