Mineral oils with specific additivation for lubricating flooded rotary air compressors. DACNIS VS is characterized by its longer drain interval, which can reach 3000-3500h for lubricated rotary compressors, under standard operation conditions. Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised
-Mineral oils with specific additivation for lubrication of lubricated rotary air compressors -DACNIS VS is characterized by its longer drain interval, which can reach 3000-3500h for lubricated rotary compressors, under standard conditions of use. -Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised.
-Mineral oils with specific additivation for lubrication of lubricated rotary air compressors. -DACNIS VS is characterized by its longer drain interval, which can reach 3000-3500h for lubricated rotary compressors, under standard conditions of use. -Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised.
- Mineral oils with specific additivation for lubrication of lubricated rotary air compressors. - DACNIS VS is characterized by its longer drain interval, which can reach 3000-3500h for lubricated rotary compressors, under standard conditions of use. - Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised.
NA
• Highly adhesive grease suitable for the lubrication of needle roller bearings
Multipurpose, High power cleaning solvent Aerosol
Detergent designed to wash out oils (spinning, coning and knitting origin) from hosiery items. Designed to clean elastomer content knitted fabrics, as hosiery, bodies, ribbon, etc .
Rinsing bath coning oil for dyed polyester yarns for the automotive market
Preliminary work and semi-finishing.
Semi-finishing work and finishing for complex forms and precise dimensions.
Generally used for both rough machining and finishing. For finishing operations when the shapes are complex and with very accurate dimensions. Recommended by many spark erosion equipement manufacturers.
