TotalEnergies OSYRIS Y 3000
Range :OSYRIS
Market segment(s) :Steel, Metalworking, Automotive Manufacturing
Application(s) :Protection
Viscosity :-
Short marketing text:
Anti-corrosion neat oils. It comply with the ISO Standard 6743/8 (1987) : category L-RL.
Long-term, anti-rust protection of machines and metals, tubes, shafts, bars stored in covered areas, away from the elements.
Protection of diverse mechanical parts, gears in casing, gearboxes, etc.
Product description:
OSYRIX Y 3000 protect parts by coating them with an oily, non-drying film which is both adherent and durable.
- High spreading ability,
- Minor water-repellent properties,
- Good resistance to humid air and acid atmospheres,
- Prevents corrosion that may be caused by direct handling of parts,
- Recommended protection duration with OSYRIS 3000 is 6 months indoor. This duration depends a lot on the environment of the protected metal, we advise you to test the product on some pieces before validating it technically.
OSYRIX Y 3000 may be applied:
- by spraying,
- by immersion,
- by brush or paintbrush.
If application is done by immersion, parts may be treated even when hot.
• Removal of the protective film :
- by solvent (white spirit, distillates, petrol, etc…)
. wipe away with a cloth soaked in solvent.
. immersion and agitation in two successive baths (5 to 30 minutes depending on the thickness of the film and the temperature).
- by petrol containing 1 % of commercially available emulgator:
. soaking 10 to 30 minutes, draining, washing in hot water, drying.
- Alkaline solutions at 85/95°C:
. immersion and agitation for 5 to 30 minutes, washing in hot water, drying.
. the following may be used for the solution:
- silicate of sodium : 0.5 %
- trisodium phosphate : 1 %
- sodium carbonate : 1 to 2 %