SYNTHETIC FLUID FOR BRAKE SYSTEMS
Semi-synthetic lithium/calcium grease for use in extreme cold conditions to lubricate automobile speedometer cables and wiper arms axles.
Synthetic PAG grease adapted to heavy loads. For worm gear pairs, casing gears or fitted devices.
Traxium axle 9 FE 75W-140 is a very high performance multigrade axle oil, formulated for the most severely loaded gear applications, with fuel economy synthetic technology.
Automatic transmissions and hydraulic systems for which the manufacturer recommends the use of a FORD WSS-M2C33F or WSS-M2C 33G type fluid: - automatic gear boxes - couplers and torque converters - power steering
High performance OAT coolant for use in stationary gas engine operating in cogeneration plants
Steam cylinder engines.
Equipment operating under high temperature and load conditions. Bearings and gears operating in a warm, moist environment. Wet- and dry-end sections of papermaking machines. Advised when loaded gears form part of the lubrication circuit.
Plain or rolling bearings and medium-loaded gears subjected to considerable temperature constraints. Recommended for drying cylinder bearings for papermaking machines.
OSYRIS DWX 1000, can be applied by dipping or spraying when application is by dipping, a tank fitted with a slopping bottom and a drain-plug is required. Displaced water collects at the bottom of the tank should be drawn-off.
Protection of machined or unmachined surfaces and mechanical parts, which must be, protected temporarily ant where the protection product must be easy to remove.
Alternating and rotary vacuum pump. Extraction of acid or corrosive gases.
